Assembly Instructions - Stamina X EXTREME TRAINING Series Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
NOTE: DO NOT SECURELY TIGHTEN ALL BOLTS UNTIL STEP 8.
STEP 1
Bolt the MAIN STAND(1), CROSS BAR(4), and DIP STAND(5) together with HEX BOLTS
(M10x1.5x130mm)(21), ARC WASHERS(M10)(26), and NYLOCK NUTS(M10x1.5)(23). Repeat on
other side.
STEP 2
There is an "L" decal on the LEFT PUSH-UP BAR(6), and an "R" decal on the RIGHT PUSH-UP
BAR(7). Slide the LEFT PUSH-UP BAR(6) onto the DIP STAND(5) on the left side and secure with HEX
BOLTS(M6x1x48mm)(19), ARC WASHERS(M6)(24), and NYLOCK NUTS(M6x1)(22). Repeat on the
right side.
LEFT
L
R
7
RIGHT