Connecting Composite (Av) Video Signal; Connecting S-Video Signals - BenQ DV3250 User Manual

Connecting Composite (AV) Video Signal

Connect the Composite (AV) output of
your AV equipment to the Composite (AV)
signal terminal on the display using a
Composite (AV) video cable (RCA
connector) as illustrated.
Composite video input is the most
commonly used signal input. However,
this type of input also provides a less
optimal image quality. Many video
sources can only output Composite
video signals, for example, VCRs and
camcorders. Other video sources, such
as laser disc players, actually produce
slightly better results when using
Composite video.

Connecting S-Video Signals

1. Connect the S-Video output of your AV
equipment to the display's S-VIDEO
terminal using an S-Video cable. Pay
attention to the direction of the
connector on the S-Video cable when
inserting.
2. Connect the audio output of your AV
equipment to the display's S-VIDEO
AUDIO L/R input terminals using the
AV cable or equivalent.
An S-video signal provides a higher
quality image to that of Composite
video. It is recommended to use this
input whenever possible. If your AV
equipment provides a component
video output (YP
should be used in preference to either
composite or S-video signals.
P or YC C ), this
B R B R
Composite (AV) video cable
Video game
S-Video cable Audio (AV) cable
DVD player
Setting up Your Display 9