Table of Contents
Advertisement
Connecting the Composite Video input
Connect the Composite Video output of your
output equipment (like a VCR) to the AV2
VIDEO and AUDIO L/R terminals on the
display using the Composite Video cable as
illustrated.
A Composite Video cable consists of three
connectors: Yellow (video), White (left
channel audio), and Red (right channel
audio). Ensure that the colors of the plugs and
terminals match when making connection.
To view video image from this input, press
and select
INPUT
Composite Video provides the least optimal
image quality. Both S-Video and
Component Video provide better quality
video signals.
AV2 supports both Composite Video and S-
Video signal inputs. If you use S-Video, you
cannot use Composite Video for that input.
Connecting the S-Video input
1. Connect the S-Video output of your
output equipment (like a DVD player) to
the display's AV2 S-VIDEO terminal using
an S-Video cable (not provided). Pay
attention to the alignment of the plugs on
the S-Video cable when inserting so as not
to damage any pins.
2. Connect the S-Video audio output of the
output equipment to the AV2 AUDIO L
(white)/R (red) input terminals using a
suitable RCA type audio cable.
To view video image from this input, press
and select
INPUT
You should not connect both a composite
Video and an S-Video from the same
device; just one or the other. If you have
the choice, use the S-Video instead of
composite Video as an S-video signal
provides a higher quality signal to that of
composite Video.
10
Section 1: Quick Start Guide
AV2.
AV2-S.
Composite
Video (AV) cable
VCR
Audio cable
S-Video
cable
DVD
player
Advertisement
Table of Contents
