Maintenance Mode - Epson SC-F2000 Series User Manual

SC-F2000 Series User's Guide
Setting Item
Reset All Settings

Maintenance Mode

See the following for more information on starting Maintenance Mode.
"Starting and Ending the Maintenance Mode Menu" on page 69
U
*1 indicates the default settings
Setting Item
Custom
Sleep Mode
Reset All Settings
Using the Control Panel Menu
Setting Description
Yes
Select Yes to revert all setting values to their default values
expect for the following.
No*1
❏
❏
❏
Even if you perform a reset, the mode currently being used
(White ink mode, Color ink mode, High-speed color mode) is
not changed.
Setting Description
XXX Only use this setting if instructed to by technical support staff
and so on, and only perform the settings and operations as
instructed. This should not normally be used.
OFF The printer enters sleep mode automatically when there are
no errors, no print jobs being received, and no control panel or
5 to 180 minutes later
other operations are performed for the selected period. Use
(30*1)
this option to choose the period before the printer enters
sleep mode. When the printer enters sleep mode, the control
panel's screen turns off and the internal motors and other
parts switch off to consume less power. The screen display
returns if a button is pressed on the control panel; however,
the panel turns off again if no operations are performed for 30
seconds. The printer recovers completely when hardware
operations are performed such as when print job data is
received.
Yes
Select Yes to revert all setting values to their default values
expect for the following.
No*1
❏
❏
❏
Even if you perform a reset, the mode currently being used
(White ink mode, Color ink mode, High-speed color mode) is
not changed.
77
Date & Time
Language
Maintenance Mode
Date & Time
Language
Custom