SC-F2000 Series
User's Guide
Control panel
A
Plight (Power light)
Indicates the printer's operational status by lighting or flashing.
On
Flashing
Off
B
P button (Power button)
Turns the power on and off.
C
+ button (Cancel button)
If you press this button after print data has been sent, the Cancel Job confirmation screen is displayed. To cancel the
print job, select Yes and then press the Z button.
If you press this button while a message or menu is displayed, the message or menu is closed and you are returned to
the Standby screen.
D
Screen
Displays the printer's status, menus, error messages, and so on.
"Screen View" on page 15
U
E
} button (Operate movable base button)
Moves the movable base backwards and forwards. The movement direction depends on the position of the base before
the button is pressed.
When base at side
When base inside
When base in center :
If you press the button again while the base is moving, it stops moving.
Introduction
:
The power is on.
:
The printer is operating such as receiving data, shutting down, or moving the movable
base.
:
The power is off.
:
Moves into printer
:
Moves towards you
Moves towards you
13