Epson SC-F2000 Series User Manual page 73

SC-F2000 Series User's Guide
Setting Item
Selected Nozzles
All Nozzles
Tube Washing
Head Cleaning Set
Caps Cleaning
Cleaning around head
Waste Ink Counter
Replace White Ink*2
Using the Control Panel Menu
Setting Description
Execute (Light)*1 Find the number of the patterns with faint or missing areas on
the check pattern sheet, specify all rows or specific nozzle rows
Execute (Medium)
containing the numbers, and clean the print head.
Selected Nozzles allows you to select the nozzle rows to be
Execute (Heavy)
cleaned. All Nozzles cleans all of the nozzles in the print head.
Execute (Light)*1
You can set Execute (Light), Execute (Medium), or Execute
(Heavy) as the head cleaning level. Try Execute (Light) first. If
Execute (Medium)
the check pattern still contains faint or missing areas even after
performing Execute (Light), try Execute (Medium). If the
Execute (Heavy)
check pattern still contains faint or missing areas even after
performing Execute (Medium), try Execute (Heavy).
For several times after the initial ink charging, cleaning is
performed in the same way as for initial ink charging,
regardless of the selected level.
U
White Ink*1 *2 Removes sediment that has accumulated in the selected ink
tube. For White Ink, a message is displayed when it is time to
Color Ink
perform maintenance. For Color Ink, wash the tubes if
performing head cleaning several times does not clear the
problem. Execute after preparing the selected ink cartridge
and Cleaning cartridge.
U
Yes Moves the platen and print head to the maintenance position.
Make sure you select this menu before replacing the head
No*1
cleaning set. If you replace without using this menu, the
remaining amount in the head cleaning set is not displayed
correctly. Problems can also occur if you move the print head
manually.
U
Yes Moves the platen and print head to the maintenance position.
Make sure you select this menu before cleaning caps.
No*1
Problems can occur if you move the print head manually.
U
Yes Moves the platen and print head to the maintenance position.
Make sure you select this menu before cleaning. Problems can
No*1
occur if you move the print head manually.
U
- If you have replaced the waste ink bottle before a message is
displayed on the control panel telling you to do so, reset the
Waste Ink Counter.
Yes If you select Yes, you can switch the printer from the current
mode to another mode (high-speed color mode is not
No*1
supported).
❏
❏
If you do not use White ink for two weeks or more while in
White ink mode, use this setting to change to color ink mode to
prevent print quality from declining.
U
73
"Cleaning the print head" on page 45
"Tube Washing" on page 56
"Replacing the Head Cleaning Set" on page 52
"Cleaning Caps" on page 51
"Cleaning around the print head" on page 63
When using White ink mode -> Switch to color ink mode
When using color ink mode -> Switch to White ink mode
"Replacing White Ink" on page 66