Disposing Of Used Consumables And Optional Parts - Epson SC-F2000 Series User Manual

SC-F2000 Series User's Guide
❏ Do not touch the tip of the cleaning stick with your
hand. Oils on your hand may compromise the
cleaning ability.
❏ Do not use water or organic solvents such as alcohol
on the caps or the wiper unit and so on. If ink is
mixed with water or alcohol, it may solidify.
❏ Touch a metal object before starting operations to
disperse any static electricity.
❏ Do not wipe the suction caps or the anti-drying caps
with organic solvents such as alcohol. Otherwise a
print head malfunction may occur.
Using ink cleaner
Dip the cleaning stick or cleaning cloth in the ink cleaner
as follows to clean ink stains around the suction cap that
you could not wipe off with a dry cloth, when cleaning
the carriage scale, or when cleaning around the print
head.
Important:
c
❏ This should only be used to clean the suction
cap, carriage scale, and around the print head.
❏ Depending on the usage and storage
environment, the ink cleaner may change color
after opening.
❏ If you notice that the ink cleaner has changed
color or emits a bad odor, stop using the cleaner
and open a new maintenance kit.
❏ Make sure you close the lid securely after use,
and avoid storing in locations subject to high
temperatures, high humidity, and direct
sunlight.
A
Remove the lid and the airtight seal from the ink
cleaner.
B
Pour an appropriate amount of ink cleaner into
the cup supplied with the maintenance kit.
Maintenance
C
Let the ink cleaner soak into the cleaning stick or
cleaning cloth.
Make sure that ink cleaner does not drip from the
cleaning stick or cleaning cloth.
D
Wipe the parts that need to be cleaned.
Disposal method
Ink cleaner is classified as industrial waste. Dispose of
the ink cleaner according to your local laws and statutes
such as entrusting it to an industrial waste disposal
company. When handing over the pre-treatment liquid
to the industrial waste disposal company, make sure you
include the safety data sheet.
Disposing of Used Consumables
and Optional Parts
Follow the steps below when disposing of parts.
Disposal
Dispose of consumables and optional parts according to
your local laws and statutes such as entrusting it to an
industrial waste disposal company.
See the following when disposing of surplus
pre-treatment liquid and ink cleaner.
"Using Pre-treatment Liquid" on page 26
U
"Using ink cleaner" on page 50
U
See the following when disposing of waste ink.
"Disposing of Waste Ink" on page 59
U
50