Table of Contents
Advertisement
V I I .
C O M F O R T
SLIDING SEAT ADJUSTMENT
You can reposition the Victory XL-8’s seat forward or
rearward to one of three settings to adjust the distance
between the seat and the tiller.
1. Pull up on the seat sliding lever. See figure 10.
2. Hold the lever up and slide the seat forward or
rearward into a comfortable position.
3. Release the seat sliding lever to lock the seat securely
in place.
SEAT ROTATION
The seat lock lever locks the seat in one of eight positions.
1. Push down on the seat lock lever to unlock the seat.
See figure 10.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely
in place. If the seat is not locked into position, gently
rock the seat back and forth until you hear the lever
click.
SEATBACK ADJUSTMENT
You can adjust the recline angle of your Scooter’s seat.
WARNING! Always keep your back
pressed firmly against the seatback
while adjusting the angle.
1. Pull up on the seat recline lever to unlock the
seatback. See figure 11.
2. Lean forward or backward to adjust the seatback to
a comfortable position.
3. Release the seat recline lever to lock the seat securely
in place.
ARMREST ANGLE ADJUSTMENT
You can adjust the armrest angle of your Victory XL-8.
1. While seated in your Victory XL-8, turn the armrest
adjustment dial to the left to lower the armrest angle
or to the right to raise the armrest angle. See
figure 12.
NOTE: The armrests also pivot upward to make
getting on and off of your Victory XL-8 easier.
Victory XL-8
A D J U S T M E N T S
SEAT LOCK LEVER
Figure 10. Seat Adjustment
SEAT RECLINE LEVER
Figure 11. Seatback Adjustment
Figure 12. Armrest Angle Adjustment
SEAT SLIDING LEVER
ARMREST ADJUSTMENT DIAL
25
Advertisement
Table of Contents
