Comfort Adjustments - Pride Mobility Zero Turn 10 Owner's Manual

V. C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT (see fi gure 18)
WARNING! Remove the key from the key switch
before adjusting the tiller or the seat. Never attempt
to adjust the tiller or the seat while the scooter is
in motion.
WARNING! Prior to operating the scooter, push and
pull on the tiller to ensure that the angle adjustment
mechanism is secure. Inspect the tiller adjustment
knob and the angle adjustment mechanism to
ensure that they are fully engaged. If there is
movement in the tiller, check to make sure that the
tiller adjustment knob is fully tightened.
NOTE: In order to fully lower the tiller for purposes of disassembly
or transport, you must fi rst completely remove the seat. See VI.
"Disassembly and Assembly."
MIRROR POSITION
To install the mirror (see fi gure 1, 2, 3 or 4):
1. Determine on which side to install the mirror and remove the
rubber plug from the top of the tiller handle.
2. Insert the threaded end of the mirror holder into the opening and
rotate it clockwise until snug.
3. If necessary, rotate the nut clockwise to secure the mirror in
place.
To adjust the mirror:
1. Position yourself in a seated driving position facing forward.
2. Adjust the mirror left, right, up or down until you have a good
line of sight behind you.
SEAT ADJUSTMENTS
NOTE: The seating adjustments explained in this section depend
on the type of seat on your scooter. Please refer to the Scooter
Features Table to determine which options apply to your specifi c
seat type.
Armrest Width Adjustment
Your seat type may be equipped with an armrest width adjustment
feature. The seat arms can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs. See fi gure 19.
2. Use the attached ring to pull and remove the detent pins.
3. Slide the armrests in or out to the desired width.
4. Align the adjustment holes on the seat frame and armrest, then
reinsert the detent pin.
5. Tighten the armrest adjustment knobs.
26
or
Figure 18. Tiller Adjustment Knob
IDENTIFICATION KEY
1. ARMREST ADJUSTMENT KNOBS
2. DETENT PINS
3. SEAT ROTATION LEVER
2
Figure 19. Seat Adjustments – Style A
Mid-size Scooter Series
3
1