FUNCTION SETTING
3) Select the [Function No.] by pressing the [Cursor button (Left/Right)], and select the
Function No. to be set by pressing the [Cursor button (Up/Down)].
4) Select the [Setting No.] by pressing the [Cursor button (Left/Right)], and select the Setting
No. to be set by pressing the [Cursor button (Up/Down)].
5) Pressing the [Enter button], confirm the setting.
(The data will be transferred to the indoor unit.)
Function setting
R.C.
Function
address
No.
00
30
Cancel:
OK:
Version
●
When the data was not set up on the indoor
unit "--" is displayed.
●
Set up the data again according to the
procedure in step 3), 4) above.
FUNCTION DETAILS
Refer to 13-5. FUNCTION DETAILS
ERROR
Mo 10:00AM
Setting
No.
- -
Error history
When the data was correctly set up on the indoor
unit
(Flashing display changes to illuminated display.)
- (01-169) -
Function setting
Mo 10:00AM
R.C.
Function
Setting
address
No.
No.
00
30
Cancel:
OK:
Version
Error history
Function setting
R.C.
Function
Setting
address
No.
No.
00
30
Cancel:
OK:
Version
Error history
Function setting
R.C.
Function
Setting
address
No.
No.
00
30
Cancel:
OK:
Version
Error history
GOOD
Function setting
R.C.
Function
Setting
address
No.
No.
00
30
Cancel:
OK:
Version
Error history
00
Mo 10:00AM
01
Mo 10:00AM
01
Mo 10:00AM
01