FUNCTION SETTING
3) Press the "Set Time <" button or the "Set Time >" button, to select the function number.
4) Press the "SET TEMP. V" button or the "SET TEMP. Λ" button, to select the setting number.
The display flashes during setting number selection.
5) Press the "TIMER SET" button, confirm the setting.
(The data will be transferred to the indoor unit.)
●
When the data was not set up on the indoor
unit "--" is displayed.
●
Set up the data again according to the
procedure in step 3), 4) above.
FUNCTION DETAILS
Refer to 13-5. FUNCTION DETAILS
Function number
Setting number
Ex.) Function number : 30, Setting number : 01
ERROR
When the data was correctly set up on the indoor
unit.
(Flashing display changes to illuminated display.)
- (01-166) -
GOOD