Nortel 1140E User Manual page 15

• If the name of your headset appears in the Paired: box, proceed to step 10.
• If more than one device is paired, and the one you wish to use is not shown in the Paired: box,
a. Press the Right navigation key one or more times to highlight the Paired: box. Press the Enter key to
b. Press the Up/Down navigation keys to open the list. Press the Up/Down navigations key to scroll in
c. Press the Enter key to select the headset and close the list. Press the Enter key to exit edit mode
• If more than one wireless headset is paired, the first headset paired is automatically made the active
device. To make a different headset active, do the following.
— Press the Right navigation key one or more times to highlight the Set button (next to the Set Active
The message "Set active: "device name" appears. This means the headset named is now the active
11.) Press the Exit soft key to exit to the main display. Changes are saved automatically.
9.) Choose one of the following:
navigate to the one you want, as follows:
start the edit mode.
the Paired: list and highlight your headset.
10.) Choose one of the following:
• If only one headset is paired, proceed to step 11.
Device item).
— Press the Enter soft key.
headset and is used when you press the headset key.
.
15/17