— If the search is not successful, the message "Search completed. No device found" appears. If this
happens, or if the headset times out and exits search/pairing mode, power off the headset, and repeat
If pairing is still unsuccessful, pair the phone to another wireless headset, or contact the headset vendor.
5.) When the name of your headset appears in the Found: box, press the Stop soft key or wait for
the search to finish. When the search is complete, the message "Search Completed Found
• If the name of your headset appears in the Found: box, proceed to step 7.
• If your headset is not displayed in the Found: box, select your headset from the list, as follows:
a.) Press the Right navigation key one or more times to highlight the Found: box. Press the Enter
key to start the edit mode.
b.) Press the Down navigation key to open the Found: list. Press the Up/ Down navigation keys to
scroll and highlight your headset.
c.) Press the Enter key to select the headset and close the list. Press the Enter key to exit edit
mode.
Choose one of the following:
— If the search is successful, proceed to step 5.
steps 3 and 4.
Device(s)" appears.
6.) Choose one of the following:
13/17