・Take out one screw (#1710) and two screws (#1709).
・Take out the screw (#1706).
・Remove the charge base-plate unit (#B10620).
#1710
Remove the charge lever section by disengaging
from the convex portion of the shutter.
Shutter unit
・Remove the six and four soldering bridges each.
・Take out the two screws (#1509) and one screw (#1505).
・Remove the shutter unit (#B12001).
#1709×2
- D ・
Charge base-plate unit #B10620
#
#B
#B0
#1706
#B10620
Soldering bridge ×4
Boss
#1509×2
#B12001
-
logo Q0440 forGraphic
070518 Gdesign ito
INC
VBA18001-R.3719.A
# ×
#
#0 ×
Soldering bridge ×6
#1505