ZyXEL Communications NWA5121-N User Manual page 88

Table 42 SSID > Security Profile > Add/Edit Security Profile (continued)
LABEL DESCRIPTION
Radius Server Type This shows External and the NWA uses an external RADIUS server for authentication.
Primary / Select this to have the NWA use the specified RADIUS server.
Secondary Radius
Server Activate
Radius Server Enter the IP address of the RADIUS server to be used for authentication.
IP Address
Radius Server Enter the port number of the RADIUS server to be used for authentication.
Port
Radius Server Enter the shared secret password of the RADIUS server to be used for authentication.
Secret
Primary / Select the check box to enable user accounting through an external authentication
Secondary server.
Accounting Server
Activate
Accounting Enter the IP address of the external accounting server in dotted decimal notation.
Server IP
Address
Accounting Enter the port number of the external accounting server. The default port number is
Server Port
1813. You need not change this value unless your network administrator instructs you
to do so with additional information.
Accounting Enter a password (up to 128 alphanumeric characters) as the key to be shared between
Share Secret
the external accounting server and the NWA. The key must be the same on the external
accounting server and your NWA. The key is not sent over the network.
802.1X Select this to enable 802.1x secure authentication.
ReAuthenticatio Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited
n Timer
requests.
Idle Timeout Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Authentication Type Select a WEP authentication method. Choices are Open or Share key. Share key is
only available if you are not using 802.1x.
Key Length Select the bit-length of the encryption key to be used in WEP connections.
If you select WEP-64:
•
or
•
If you select WEP-128:
•
or
•
Key 1~4 Based on your Key Length selection, enter the appropriate length hexadecimal or
ASCII key.
PSK This field is available when you select the wpa, wpa2, or wpa2-mix security mode.
Select this option to use a Pre-Shared Key with WPA encryption.
Pre-Shared Key Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
Chapter 9 AP Profile
Enter 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example,
0x11AA22BB33) for each Key used.
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for
example, MyKey) for each Key used.
Enter 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example,
0x00112233445566778899AABBCC) for each Key used.
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for
example, MyKey12345678) for each Key used.
NWA5120 Series User's Guide
88