ZyXEL Communications NWA5121-N User Manual page 54

Figure 30 Configuration > Network > IP Setting
Each field is described in the following table.
Table 25 Configuration > Network > IP Setting
LABEL DESCRIPTION
IP Address
Assignment
Get Select this to make the interface a DHCP client and automatically get the IP address,
Automatically
subnet mask, and gateway address from a DHCP server.
Use Fixed IP Select this if you want to specify the IP address, subnet mask, and gateway manually.
Address
IP Address Enter the IP address for this interface.
Subnet Mask Enter the subnet mask of this interface in dot decimal notation. The subnet mask
indicates what part of the IP address is the same for all computers in the network.
Gateway Enter the IP address of the gateway. The NWA sends packets to the gateway when it
does not know how to route the packet to its destination. The gateway should be on the
same network as the interface.
DNS Server IP Enter the IP address of the DNS server.
Address
IPv6 Address
Assignment
Enable Stateless Select this to enable IPv6 stateless auto-configuration on the NWA. The NWA will
Address Auto-
generate an IPv6 address itself from a prefix obtained from an IPv6 router in the
configuration
network.
(SLAAC)
Chapter 6 Network
NWA5120 Series User's Guide
54