Ssh Implementation On The Nwa - ZyXEL Communications NWA5121-N User Manual

Figure 82 How SSH v1 Works Example
Host Identification
1
The SSH client sends a connection request to the SSH server. The server identifies itself with a
host key. The client encrypts a randomly generated session key with the host key and server key
and sends the result back to the server.
The client automatically saves any new server public keys. In subsequent connections, the server
public key is checked against the saved version on the client computer.
Encryption Method
2
Once the identification is verified, both the client and server must agree on the type of encryption
method to use.
Authentication and Data Transmission
3
After the identification is verified and data encryption activated, a secure tunnel is established
between the client and the server. The client then sends its authentication information (user
name and password) to the server to log in to the server.

13.5.2 SSH Implementation on the NWA

Your NWA supports SSH versions 1 and 2 using RSA authentication and four encryption methods
(AES, 3DES, Archfour, and Blowfish). The SSH server is implemented on the NWA for management
using port 22 (by default).
Chapter 13 System
NWA5120 Series User's Guide
133