ZyXEL Communications NWA5121-N User Manual page 135

Launch the SSH client and specify the connection information (IP address, port number) for the
1
NWA.
Configure the SSH client to accept connection using SSH version 1.
2
A window displays prompting you to store the host key in you computer. Click Yes to continue.
3
Figure 84 SSH Example 1: Store Host Key
Enter the password to log in to the NWA. The CLI screen displays next.
13.5.5.2 Example 2: Linux
This section describes how to access the NWA using the OpenSSH client program that comes with
most Linux distributions.
Test whether the SSH service is available on the NWA.
1
Enter "telnet 192.168.1.2 22" at a terminal prompt and press [ENTER]. The computer
attempts to connect to port 22 on the NWA (using the default IP address of 192.168.1.2).
A message displays indicating the SSH protocol version supported by the NWA.
Figure 85 SSH Example 2: Test
$ telnet 192.168.1.2 22
Trying 192.168.1.2...
Connected to 192.168.1.2.
Escape character is '^]'.
SSH-1.5-1.0.0
Enter "ssh –1 192.168.1.2". This command forces your computer to connect to the NWA using
2
SSH version 1. If this is the first time you are connecting to the NWA using SSH, a message
displays prompting you to save the host information of the NWA. Type "yes" and press [ENTER].
Then enter the password to log in to the NWA.
Figure 86 SSH Example 2: Log in
$ ssh –1 192.168.1.2
The authenticity of host '192.168.1.2 (192.168.1.2)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.2' (RSA1) to the list of known hosts.
Administrator@192.168.1.2's password:
Chapter 13 System
NWA5120 Series User's Guide
135