Date And Time - ZyXEL Communications NWA5121-N User Manual

The following table describes the labels in this screen.
Table 58 Configuration > System > Host Name
LABEL
System Name
Domain Name
Apply
Reset

13.3 Date and Time

For effective scheduling and logging, the NWA system time must be accurate. The NWA has a
software mechanism to set the time manually or get the current time and date from an external
server.
To change your NWA's time based on your local time zone and date, click Configuration > System
> Date/Time. The screen displays as shown. You can manually set the NWA's time and date or
have the NWA get the date and time from a time server.
Figure 72 Configuration > System > Date/Time
Chapter 13 System
DESCRIPTION
Choose a descriptive name to identify your NWA device. This name can be up to 64
alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and
periods (.) are accepted.
Enter the domain name (if you know it) here. This name is propagated to DHCP clients
connected to interfaces with the DHCP server enabled. This name can be up to 254
alphanumeric characters long. Spaces are not allowed, but dashes "-" are accepted.
Click Apply to save your changes back to the NWA.
Click Reset to return the screen to its last-saved settings.
NWA5120 Series User's Guide
118