Connecting an RS-232C Interface
This connection is made either directly from the scanner to the host, or indirectly through a
Synapse adapter cable to the host.
RS-232C Direct Connection
1. Connect the RS-232C interface cable to the bottom of the scanner, as described in
Installing the Interface Cable
2. Connect the other end of the interface cable to the serial port on the host.
3. Connect the power supply.
Connecting a Keyboard Wedge Interface
When configured for Keyboard Wedge input, the host accepts input from the scanner as
keystrokes. The LS1900 Series scanner can perform Keyboard Wedge input using a
Keyboard Wedge cable, or a Synapse adapter cable (see
Power supply
Figure 1-3. RS-232C Direct Connection
on page 1-3.
Host serial port
Interface cable
Figure 1-6 on page
Getting Started
1-8).
1-5