Connecting A Keyboard Wedge Interface - Symbol LS 4008i Product Reference Manual

LS 4008i Product Reference Guide

Connecting a Keyboard Wedge Interface

Power supply
(if needed)
Figure 5-1. Keyboard Wedge Connection with Y-cable
To connect the Keyboard Wedge Y-cable:
1. Switch off the host and unplug the keyboard connector.
2. Attach the modular connector of the Y-cable to the cable interface port on the
scanner. (See
3. Connect the round male DIN host connector of the Y-cable to the keyboard port on
the host device.
4. Connect the round female DIN keyboard connector of the Y-cable to the keyboard.
5. If needed, attach the optional power supply to the connector in the middle of the Y-
cable.
6. Ensure that all connections are secure.
7. Switch on your host system.
8. Scan the appropriate bar codes in this chapter to configure the scanner.
5-2
Male DIN Keyboard Connector to Host Connector to Host
Installing the Interface Cable
Y-cable
on page 1-3.)