Rule Belongs To Set; Actions; Send Data; Setup Field(S) - Symbol LS1900 Series Product Reference Manual

LS1900 Series Product Reference Guide

Rule Belongs To Set

Select the set a rule belongs to. (There are four possible rule sets.)

Actions

Select how to format the data for transmission.

Send Data

Send all data that remains, send all data up to a specific character selected from the
Alphanumeric Keyboard, or send the next N characters. N = any number from 1 to 254,
selected from the Alphanumeric

Setup Field(s)

Define fields as follows:
Move Cursor To a Character
Scan the MOVE CURSOR TO CHARACTER bar code on page 5-26, then any printable
ASCII character from the
the position after the matching character. If the character is not there, the rule fails and ADF
tries the next rule.
Move Cursor to Start of Data
Scan this bar code to move cursor to the beginning of the data.
Move Cursor Past a Character
This parameter moves the cursor past all sequential occurrences of a selected character.
For example, if the selected character is 'A', then the cursor moves past 'A', 'AA', 'AAA', etc.
Scan the MOVE CURSOR PAST CHARACTER bar code on page 5-26, then select a
character from the Alphanumeric
not move (i.e., has no effect).
Skip Ahead "N" Characters
Scan one of these bar codes to select the number of positions ahead you wish to move the
cursor.
5-4
Keyboard.
Alphanumeric Keyboard. When this is used, the cursor moves to
Keyboard. If the character is not there, the cursor does