Intercharacter Delay - Symbol LS1900 Series Product Reference Manual

LS1900 Series Product Reference Guide

Intercharacter Delay

Select the intercharacter delay option matching host requirements. The intercharacter
delay gives the host system time to service its receiver and perform other tasks between
characters. The delay period can range from no delay to 99 msec in 1-msec increments.
After scanning the bar code below, scan two bar codes beginning on page 4-119 to set the
desired time-out. If you make an error or wish to change your selection, scan CANCEL
on page 4-121.
Intercharacter Delay
4-114