Replacing The Oven Light - Electrolux FGES3065P series Service Manual

Section 3 Electronic Control Guide

Replacing the Oven Light

CAUTION
Be sure the oven is unplugged and all parts are cool before
replacing oven light.
The interior oven lights are located at the rear of the oven
cavity and are covered with a glass shield. The glass shield
must be in place whenever the oven is in use (See
41).
Replacing the oven interior light bulb:
1. Turn electrical power off at the main source or unplug
the appliance.
2. Remove interior oven light shield by pulling the light
straight out. Do not twist or turn.
3. Replace bulb with a new T-4 type Halogen 25 watt
appliance bulb.

NOTE
Do not allow your fingers to touch the new bulb when
replacing. This will shorten the life of the bulb. Use a paper
towel or cotton glove while handling the new bulb when
installing.
4. Replace glass oven light shield.
5. Turn power back on again at the main source (or plug
the appliance back in).
6. Be sure to reset the time of day on the clock.
Figure 41: Wall oven Halogen light
3-22
Figure