Electrolux FGES3065P series Service Manual page 3

Safe Servicing Practices
To avoid the possibility of personal injury and/or property damage, it is important that safe servicing
practices be observed. The following are examples of some, but not all, of these practices.
1. DO NOT attempt a product repair if you have any doubts as to your ability to complete it in a safe and satisfactory
manner.
2. Before servicing or moving an appliance, remove power cord from electric outlet, trip circuit breaker to OFF, or
remove fuse and turn off gas supply.
3. Never interfere with the proper installation of any safety device.
4. Use ONLY REPLACEMENT PARTS CATALOGED FOR THIS APPLIANCE. Substitutions may defeat
compliance with safety standards set for home appliances.
5. GROUNDING: The standard color coding for safety ground wires is GREEN or GREEN with YELLOW STRIPES.
Ground leads are not to be used as current carrying conductors. IT IS EXTREMELY IMPORTANT THAT THE
SERVICE TECHNICIAN REESTABLISH ALL SAFETY GROUNDS PRIOR TO COMPLETION OF SERVICE. FAILURE TO DO
SO WILL CREATE A POTENTIAL HAZARD.
6. Prior to returning the product to service, ensure that:
• All electric connections are correct and secure.
• All electrical leads are properly dressed and secured away from sharp edges, high-temperature components, and
moving parts.
• All non-insulated electrical terminals, connectors, heaters, etc. are adequately spaced away from all metal parts
and panels.
• All safety grounds (both internal and external) are correctly and securely reassembled.
• All panels are properly and securely reassembled.
This service data sheet is intended for use by persons having electrical and mechanical training
and a level of knowledge of these subjects generally considered acceptable in the appliance
repair trade. The manufacturer cannot be responsible, nor assume any liability, for injury or
damage of any kind arising from the use of this data sheet.
ATTENTION!!!
© 2013 Electrolux Home Products, Inc.
Section 1 Basic Information
1-1