Replacing The Oven Light - Electrolux Electric Range Use & Care Manual

Changing and replacing the interior oven
light (some models)
Be sure the range is unplugged and all parts are COOLbefore
replacing oven light. Wear a leather-faced glove for protection
against possible broken glass.
The glass shield and wire holder must be in place
whenever the oven is in use. This shield helps protect the
appliance bulb from high temperatures.
The interior oven light bulb is located on the rear wall of the
oven and is covered with a glass shield held by a wire
holder.
Oven
Light
Wire
Holder
Fig. 1
To replace the interior oven light bulb:
1. Turn electrical power off at the main source or unplug
the range.
2. Open oven door for access to interior oven light. Once
located, press wire holder to one side to release the
glass shield (See Fig.l).
3. Replace bulb with a new 40 watt appliance bulb.
4. Replace glass shield over bulb and snap wire holder
into place.
5. Turn power back on again at the main source (or plug
the range back in).
6. The clock will then need to be set with the correct time
of day. To reset, see "Setting the Clock" in this Use &
Care Guide.