Configure An Ftp Server To Store Snapshots; Snmp Settings - Interlogix TruVision User Manual

Chapter 11: Network settings
4. Click Apply to save the settings and click
Note: We recommend that you test the email settings after entering values in the Email
window.

Configure an FTP server to store snapshots

You can upload your snapshots to an FTP server for storage.
Note: It is not possible to stream video to an FTP site.
To configure the FTP server settings:
1. From the menu toolbar, click
2. Check the Enable FTP
3. Enter the FTP server information.
4. Select the directory to use (root, parent, or secondary). If Parent or Secondary were
selected, select the desired options for them.
5. Click Apply to save the settings and click

SNMP settings

SNMP is a protocol for managing devices on networks. When you enable SNMP in the
menu, network management systems can retrieve recorder status information from the
recorder via SNMP.
When you set the trap address and trap port in the recorder menu to the network
management system's IP address and port number, and set up the network
management system as trap receiver, trap notifications (such as startup) are sent from
the recorder to the network management system.
Before configuring this function, you must first install the SNMP software.
To configure SNMP protocol settings:
1. From the menu toolbar, click
2. Check the Enable SNMP
3. Enter the required settings.
4. Click Apply to save the settings and click
82
Exit
Network Settings
box.
Exit
Network Settings
box.
Exit
to return to live view.
> FTP.
to return to live view.
> SNMP.
to return to live view.
TruVision DVR 12HD User Manual