Lamp Adjustment - Elation MiniPatend Instruction Manual

Lamp adjustment

Lamp adjustment must be performed after every lamp change.
Attention:
Be sure the lamp is securely seated in the lamp socket. Also pay close
attention to the lamp orientation, optimum distance between the lamp and
Mini PATEND
The Mini PATEND
lamps, fine adjustments may improve light performance.
Pease follow this procedure:
1. Strike the lamp (for example in the
of the lamp is reached.
2. Direct the beam straight onto a flat and bright surface/wall (beam open, white, no
gobo, no effects).
3. If the Hot Spot (brightest part of the beam) is not in the middle, and the beam is not
at maximum brightness, you can adjust this by turning the screws 1, 2 and 3. Try to
find the brightest position.
Remark: A complete even beam can't be reached because of the design of the
lamp.
Elation Professionals
the lens should range between 1.0 - 1.5 mm.
lamp holder is aligned at the factory. Due to differences between
- wwww.ElationLighting.com
LAMP
menu) and wait a while until full intensity
22
Page