Default Settings; Error Code; Error And Information Messages - Elation MiniPatend Instruction Manual

GOBO
SHTR
ARES
clre

2.9.7 Default Settings

DFSE
Press Enter to reset all fixture personalities (not the adjusted functions) to the
default values. O
set.
Function
DMX Address
Pan reverse
Tilt reverse
Automatic lamp on
Lamp on via DMX
Display

2.9.8 Error Code

EFLG
(Function available for authorized persons only)

2.10 Error and Information Messages

This message informs you that one of the unit functions wasn't
RsER
able to do its reset correctly (magnetic sensor, stepping motor,
driver on the PCB, cables, etc.). Repair the defect and start the
fixture again.
Elation Professionals
- 99 - + 99
- 01 - + 01
To initiate a reset for adjustment of the Shutter. Unit must be
turned off and on afterwards.
Adjustments in the internal circuit.
k will appear on the display
Display
D001
RPAN
RTLT
LAAU
DLOF
DISP
- wwww.ElationLighting.com
Gobo wheel
Shutter
to indicate that the defaults are
Default Settings
D001
ON OFF
ON OFF
ON OFF
ON OFF
¸
D ON
¸
17
Page
¸
¸
¸