Table of Contents
Advertisement
2.1 Adjust the DMX- Address
Right after turning on the MINI PATEND
there is no DMX- signal the display flashes.
D001
For the address setting please follow this procedure:
1. Switch ON the MINI
is flashing in the display).
2. Press the Mode-button in order to access the main menu. Browse through the
menu by pressing the Up/Down-buttons until the display shows
pressing the Enter-button (the decimal point is flashing).
3. Use the Up/Down-buttons to select the desired address. Confirm the setting by
pressing the Enter-button (the display shows
cancel.
The DMX- address is stored also while switching off the MINI PATEND
2.2 The Audio Program
Audi
The Audio-menu allows you to run a stand-alone audio program. This chaser can run
either fast or slow.
Every second sound impulse is one step of the chaser.
If you want to run the systems simultaneously, one of the MINI
selected as the master. All others must be "Slave" Master = OFF.
Notice: The Audio function is only working when NO DMX is connected. This can work
as an emergency program.
2.3 The Test Program
TEST
Elation Professionals
MINI PATEND
MINI
PATEND
PATEND
and wait until the fixture reset has finished ('
AFST
: Every sound impulse is one step of the chaser.
-
wwww.ElationLighting.com
you can see the current DMX- address. If
OK
) or press the Mode-button to
MINI PATEND
MINI
Page
RESE
D001
. Confirm by
!
ASLW
PATEND's
PATEND's
must be
12
'
:
Advertisement
Table of Contents
