Table of Contents
Advertisement
1.3 Connections
1.3.1 Power supply
230 Volt, 50 Hz,
Connected load 300W <=> 2 A (power factor corrected).
or 115V, 60 Hz,
Connected load 300W <=> 3.15 A (power factor corrected).
Please see printing on the case for the right Power supply !
1.3.2 DMX
A DMX-512 Standard input/output connection is required. See also printing on
the case for the right pin assignment.
[+] = Pin 3 / [-] = Pin 2 / [Ground] = Pin 1
The DMX- Addressing starts at the DMX- Address [001].
1.4 Fuse
MINI PATEND
The MINI PATEND
fuses.
230V / T 2A (EU) or 115V / T 3.15A (US)
Please see the printing on the MINI PATEND
Attention:
• Disconnect main power supply before replacing the fuse!
• Replace fuse with same type and rating only!
Elation Professionals
electronic system is protected by two (live and neutral) 5x20 m m
MINI PATEND
-
wwww.ElationLighting.com
for more details.
10
Page
Advertisement
Table of Contents
