NEC NC1600C Service Manual page 77

2. Operating the Projector Using the Touch Panel
Menu bar
Menu buttons are displayed here. The menu selected here is displayed in the main window below.
There are two indicator icons on the top of the [Shield] button.
1 Indicator Icon (Left)
Shows the poling mode (ON/OFF). When the poling mode is ON, the projector's status information is automatically updated
every three seconds (default setting).
The poling mode is enabled in the START screen and MAIN screen.
Lights (Blue)
Off
2 Indicator Icon (Right)
This shows the status of the projector.
Lights (Green)
Lights (Red)
Main window
The menu selected from the menu bar is displayed here.
Status bar
The status of the controller is displayed with icons.
1 Title Display
Displays the selected title name and preset button number.
2 Signal Input icon
Shows the input signal terminal selected.
Input for DVI-A
terminals
Input for DVI-B
terminals
Dual/Twin input for
DVI-A and DVI-B
terminals
6
When the poling mode is ON
When the poling mode is OFF
The projector is operating normally.
The projector is experiencing and error.
1 2
Displays title name
Displays preset button number
Indicator Icon
3 4
Input for SDI-A
terminals
Input for SDI-B
terminals
Dual input for SDI-A
and SDI-B terminals
5 6 7 8
Input for the multi-media
switcher (MMS) terminal
TWIN Input for the
multi-media switcher
(MMS) terminal
Displaying test patterns