3. Data updating (Projector "MENU CTL" key operation)
1) Turn the power switch ON while the
2) When the Status LED is turned green, press the
3) Press the
MENU
1
POWER SW
+
CANCEL
LCD Display
Data being updated
Data Update
4) Turn the power switch OFF and pull out the Compact Flash memory.
Caution) Failure in updating: Power LED blinking in red ⇒ ⇒ ⇒ ⇒ ⇒ Retry updating.
After the completion of firmware and data updating, let the projector to assume the "Standby" status.
According to "Information → Version" of the LCD menu, check versions for the following three items:
- BIOS
- Firmware
- Data
"Confidential, Do Not Duplicate without written authorization from NEC."
METHOD OF FIRMWARE UPGRADING
CANCEL
key.
2
CANCEL
∗
6-16
key is kept pressed.
CANCEL
key.
3
MENU
End of data update
Data Update
Completed