NEC NC1600C Service Manual page 332

HANDLE
Diagram symbol Circuit symbol
PRT1
PRT2
SRW094
PRT3
1 Attach the CAUTION LABEL (HANDLE) and the ball lock pin to the HANDLE.
SRW094
PRT2
2 The BALL LOCK PIN shall be mounted so that it stands
upright along the HANDLE.
(To be mounted on both sides)
4 Install the HANDLE on the set main body.
(When the handle has been inserted fully, insert the BALL LOCK PIN
from the side so that the handle cannot be drawn out.)
"Confidential, Do Not Duplicate without written authorization from NEC."
ASSEMBLY DIAGRAM
Part name
HANDLE
BALL LOCK PIN(BJ775-08040
PL-CPIMS*4*10*3KF
CAUTION LABEL(HANDLE)
PRT1
5 Insert the BALL LOCK PIN so that the HANDLE cannot be drawn out.
9-92
Part code Q'ty
24BS7841 2
24C08871 4
24V00461 4 Torque check
24L63911 2
PRT3
3 The CAUTION LABEL shall be stuck so that it is
positioned in the center of the HANDLE.
Direction for adhesion shall be such that the label
is legible from the direction of the arrow.
Remarks
PRT2