NEC NC1600C Service Manual page 159

2) Setting for the projector being connected
Enter the IP address of 192. 168. 10. 11.
3) Select the connecting port.
Select the "External Ethernet port."
(When connection is successful, "Log In" is displayed in "Version Info".)
4) Security setup
Enter the User ID and Password in the Security item and press
ID : Service
Password : Heal
When Log In is successful, the version information specified below is displayed in "Version Info".
"Confidential, Do Not Duplicate without written authorization from NEC."
METHOD OF FIRMWARE UPGRADING
Thyself ( : for Blank)
6-12
Login
.