NEC NC1600C Service Manual page 322

Side Panel RR Sassy
Diagram symbol Circuit symbol
PRT1
PRT2
PRT3
Caution : External parts shall be handled carefully so that they are not damaged.
Caution : EMI (Electromagnetic Interference: Radio interference noise)
1 Cut the Gasket (STG2-10) into a piece of 300mm and stick it to the Side Panel RR Assy.
"Confidential, Do Not Duplicate without written authorization from NEC."
ASSEMBLY DIAGRAM
Part name
SIDE PANEL RR ASSY
GASKET(STG2-10)
INSTRUCTION NAME PLATE
PRT2
PRT1
* For the INSTRUCTIOn NAME PLATE, adjust the upper part of the LABEL to
the extended line from the upper end of the Rear Panel B Assy.
On the side surface, stick the label 10 ~ 20mm from the end line of the Side
Panel RR Assy.
To be stuck to the front surface of the Side Panel RR Assy.
SAFETY
SAFETY
SAFETY
9-82
Part code Q'ty
24PS5301 1
24C06051 300mm
24L63652
Torque check
Torque check
Do not forget adhesion of the NAME PLATE and the CAUTION LABEL
(Requirements of Safety Standard)
Confirm that all the safety standard requirements are printed on the
NAME PLATE
(Requirements of Safety Standard)
Confirm the factory certificate number on the NAME PLATE.
(North America)
(720SS) for SSS China
(Requirements of Safety Standard)
Remarks