Connecting The Various Control Terminal - NEC NC1600C Service Manual

2-3. Connecting the various control terminal

For control, your projector comes with such ports as the PC control terminal and the Ethernet port (RJ-45).
• PC control terminal (PC CONTROL) ----- Use this terminal when controlling the projector in serial connection from a PC.
• Ethernet port (LAN 1/LAN 2) --------------- Use this port when controlling the projector in LAN connection from a PC.
RS-232C
SDI-A DVI-A
SDI-B
CINEMA
SYSTEM
REMOTE
RS-232C
IN
Ethernet cable
2. Installation and Connection
DVI-B
PC CARD
USB
GP I/O
LAN-A LAN-B
19