Register Scan Destination - Ricoh SP C250SF User Manual

RICOH SP C250SF/SP C252SF Color Multifunction Printers
Getting Started Guide
4.2.2 Register Scan Destination (via Web Image Monitor)
Next, you need to register the network share folder (created in previous section) as a Scan Destination
in the printer's Address Book, using Web Image Monitor. Scan Destinations cannot be registered using
the printer's control panel.
Important: Access to Web Image Monitor is possible when the printer is network-connected (wired or
wireless), but not via USB-only connection.
To register a scan destination, proceed as follows:
1. Open web browser.
2. In address bar, enter printer's IP Address, e.g., http://123.45.6.7.
Note: If Web Image Monitor Home page does not display, restart the printer and try again.
3. Click [Scan Destination].
4. Click [Destination Type] drop-down [ ], and select [Folder].

36