Adding Information To Titles; Pre Rec Function - Sony DVO-1000MD Instructions For Use Manual

The FOOT SW sub menu appears.
5
Select the desired mode by pressing the V or v
button.
Mode Setting
LOW EDGE To start recording when you push
the foot switch, or to pause
recording during recording.
Even if you release the foot switch,
the recording or pause recording
status remains in effective. (Factory
setting)
HIGH EDGE To start recording when you push
the foot switch and release it, or to
pause recording during recording.
The unit does not change from one
operation to another when you push
the foot switch.
LOW ACTIVE While you hold the foot switch
down, the unit records. When you
release the foot switch, the unit
pauses.
6
Press the SET button.
The message "NOW SAVING..." appears and the
unit starts to save the setting.
When the saving is completed, the message
disappears and the unit returns to the normal
display.

Adding Information to Titles

When you record data, the recording month/date/year/
hour/minute/second (example: 01/06/04 17:25:19) is
recorded automatically.
Also, the RM-P110 remote control unit (not supplied)
allows you to change the title name and to record data of
2048 bytes every title using the keyboard of the RM-
P110. Thus, you can record additional information for a
title.
To use an RM-P110 (not supplied) as a
keyboard for editing/adding title name and
information
You should carry out the following operation and menu
settings:
• Connect the RM-P110 to the RS-232C connector of
the unit.
• Set the REMOTE I/F sub menu (see page 47) of the
SETUP MENU to RS232C.
• Set the KEYBOARD sub menu (see page 47) of the
SETUP MENU to ON.
You can enter characters in overwrite mode. Use the
ESC key for the backspace function.
Notes
• Be sure to turn off the power of the unit by using the
1 (power) switch on the front panel of the unit.
For detailed information on how to turn off the power
of the unit, see "Turning the Power Off" on page 15.
• When not using the RM-P110, be sure to set the
KEYBOARD sub menu of the SETUP MENU to OFF
(see page 47).
To add information to the title or edit title
information
The TITLE INFO display of the title menu allows you to
edit title information.
Title name
Title information (data of 2048 bytes)
For detailed information, see "Verifying/Editing
Information About the Title" on page 42.
When you record using equipment such as external
equipment, data is recorded via the communication
protocol.

Pre Rec Function

When the PRE REC sub menu of the SETUP is set to
"ON," the unit saves the last 5 seconds of video data in
the inernal memory. This function allows the unit to start
recording the last 5 seconds of video data saved
previously for continuity.
29
Recording