Using A Foot Switch - Sony DVO-1000MD Instructions For Use Manual

Notes
• The indexes are not marked when the RECPAUSE
INDEX sub menu (see page 49) of the ENHANCED
MENU is set to "OFF."
• Once you press the XPAUSE button to pause the
recording operation, data is not recorded until you
press the XPAUSE button again to restart recording.
To use the SVRM-100A remote control unit
Press the MARK button on the SVRM-100A remote
control unit (not supplied).
For detailed information on how to mark indexes, see
"Marking Indexes" on page 58.
To mark indexes automatically
Indexes are automatically marked every five minutes
when the AUTO INDEX (see page 47) sub menu of the
SETUP MENU is set to ON.
Note
You can mark up to 254 indexes on one disc and up to 99
indexes within one title.
When the number of indexes exceed the above
limitation, an alarm message appears.
For detailed information on alarm messages, see
"Alarm Messages" on page 52.
To make new titles automatically
The AUTO TITLE sub menu of the SETUP MENU
allows you to make a new title when the number of
indexes in one title exceeds 99.
For details, see "AUTO TITLE" on page 47.
Segment between the indexes
The segment between the indexes is called a chapter.
Title 1
Chapter1 Chapter 2 Chapter 3
Indexes

Using a Foot Switch

A foot switch (not supplied) allows you to start or pause
recording.
The operation required for starting or pausing the
recording depends on the setting of the FOOT SW sub
menu of the SETUP MENU.
Note
To stop recording when using a foot switch, press the
xSTOP button on the front panel of the unit.
28
Recording
Title 3
Title 2
Chapter1 Chapter 2 Chapter1
1
Press the MENU button.
The TOP menu appears.
2
Select "SETUP MENU" by pressing the V or v
button and press the b button with "SETUP
MENU" highlighted.
The SETUP MENU appears.
3
Select "FOOT SW" by pressing the V or v button.
4
Press the b button.