Selecting The Remote Interface - Sony DVO-1000MD Instructions For Use Manual

Selecting the Remote Interface

The REMOTE I/F sub menu of the SETUP MENU
allows you to select the interface to be used to control
the unit remotely.
The factory setting is RS-232C.
1
Press the MENU button.
The TOP menu appears.
2
Select "SETUP MENU" by pressing the V or v
button.
"SETUP MENU" is highlighted.
3
Press the b button.
20
Setup Preparation
7 1
2,4,6
3,5
The SETUP MENU appears.
4
Select "REMOTE I/F" by pressing the v button.
5
Press the b button.
The REMOTE I/F sub menu appears.
6
Select the desired remote interface by pressing the
V or v button.
The selected remote interface is highlighted.
Item Interface
RS232C To control the unit from external
equipment connected to the RS-
232C connector.
iLINK To control the unit from external
equipment connected to the i.LINK
connector.
USB To control the unit from external
equipment connected to the USB
connector.
a)
(Factory setting)
b)
c)