Service Mode; Version Information And Other Information (First Screen) - Sony RDR-HX950 Service Manual

RDR-GX350/HX750/HX950

6-2-2. Service Mode

1) Turn of the main power ON.
2) On the screen after exiting all menu screen's, press "ESC" on the service remote controller.
3) Press "DISP".
4) Press "DIG/ANA".
Overview and purposes
To be used to check the status of the product and to collect the information for failure diagnosis.
The following information to be used for servicing is displayed:
[1] First screen : Version, HDD information, etc.
[2] Second screen : ATA/ATAPI debug screen (Writer information)
[4] Fourth screen : VR-recording-related error logs
Each screen has sublevel screens.
Note: After entering any Service mode screen, to shift to another Service mode screen, first quit that Service mode screen then enter another Service
mode screen.
5) Press "ESC". (Returns to the original screen)

6-2-3. Version Information and Other Information (First screen)

1) Turn of the main power ON.
2) On the screen after exiting all menu screens, press "ESC" on the service remote controller.
3) Press "DISP".
---- 2 VERSION : 1.**
1
SYSCON : RELEASE_100
3
Rev
TUNERCON : 198.000
4
DRIVE : DVD-RW DVR-L11X
5
1.00
HDD : WDC WD1600BB-xxGUCx 160
6
7 DEVICE : E2R-FE 8 FLASH : 64M
REGION : 2
9
4) Press "ESC". (Returns to the original screen)
All manuals and user guides at all-guides.com
:1.1000
OK
OK
OK
0 C : ************
* Checking the respective software version numbers and other HDD
information.
OK : Appropriate version compared with that of the firmware of
the system control computer.
NG- : The version of the TUNER microcomputer is older.
Measures to be taken:
• Download the firmware.
OK : The appropriate drive is mounted.
NG : An inappropriate drive is mounted.
Measures to be taken: Download the firmware.
OK : Appropriate version compared with that of the firmware of
the system control computer.
NG- : The version of the drive microcomputer is older.
Measures to be taken: Download the firmware.
1 Model name/destination
2 Version of the recorder software
3 Revision No. of the system-control computer software
4 Version No. of the tuner microcomputer
Result of the combination check with system u-com
5 Information on the built-in drive
(Model name, version No., model type)
6 Data of the built-in HDD, capacity of the HDD
7 DEVICE information (EMMA type, ES No.)
8 FLASH ROM information
9 Region No.
0 CPRM information (CPRM key No.)
6-4