Location And Function Of Parts; Front Panel - Sony DVO-1000MD Instructions For Use Manual

Location and Function of Parts

Front Panel

1
(Power) switch and standby indicator
1
5 REMOTE 2 connector
4 REMOTE 1 connector
1 1 (power) switch and standby indicator
Press to power on the unit when the MAIN POWER
switch (see page 11) on the rear panel is turned on.
This causes the front panel display to light. Even if
this switch is set to off, the indicator is lit in green
when the MAIN POWER switch is set to on. To
power off the unit, press this switch again.
Note
If the MAIN POWER switch on the rear panel is
not set to on, the power is not on even if you press
the 1 (power) switch.
2 Disc tray
Used to insert or remove the disc.
3 OPEN/CLOSE button
Press to open or close the disc tray.
8
Location and Function of Parts
2 Disc tray
7 Disc control section
6 Front panel display
3 OPEN/CLOSE button
8 Menu/disc control section
4 REMOTE 1 connector (stereo mini jack)
Connect a SVRM-100A remote control unit (not
supplied) to this connector for remote control.
5 REMOTE 2 connector (mini jack)
Connect a foot switch (not supplied) to this
connector. You can control recording and pausing
using this foot switch.