Preparations For Recording; Selecting Input Signals - Sony DVO-1000MD Instructions For Use Manual

Preparations for
Recording

Selecting Input Signals

The INPUT SELECT sub menu of SETUP MENU
allows you to select the input signal to be recorded.
1
Press the MENU button.
The TOP menu appears.
2
Select "SETUP MENU" by pressing the V or v
button and press the b button with "SETUP
MENU" highlighted.
24

Preparations for Recording

1
6
2,4
2,3,5
The SETUP MENU appears.
3
Select "INPUT SELECT" by pressing the V or v
button.
4
Press the b button.
The INPUT SELECT sub menu appears.
5
Select the desired input signal by pressing the V or
v button.
Input signal Setting
ANALOG To record an analog signal input to
the VIDEO IN or S-VIDEO IN
connector. (Factory setting)
i.LINK To record a standard DV digital
signal input to the DV IN (i.LINK)
connector.
When an analog input signal is selected:
When an S video cable is connected to the S-
VIDEO IN connector of the unit, the S video signal
is selected regardless of whether an S video signal