Opening The Door; Bypass Operation - Lopi LG FLUSH WOOD Owner's Manual

16

Opening the Door

Rotate
the door
handle.
The door becomes hot during use. Use a glove to open the door if the handle is hot.
To prevent smoke from entering the room, open the bypass before opening the door (see following page
for directions). You can also open the door a small amount and let air enter the firebox.

Bypass Operation

The bypass controls the flow of smoke inside the heater. When pulled out, smoke goes directly up the
flue, creating more draft. When pushed in, the smoke goes around the baffle, utilizing the secondary
combustion and making the heater more efficient.

When starting or re-loading, pull the bypass out.

During normal operation, push the bypass in.
Use the included pull tool
to operate the bypass rod
© Travis Industries
Operating Your Appliance
100-01163
Swing
the door
open.
Bypass Pulled Out
Used for starting and re-loading
Bypass Pushed In
Used for normal operation
4150522