Mac Filtering - TP-Link Archer CR700 User Manual

Archer CR700
Enable Power Save Support - Check the box to enable this function. This function can

make the wireless client has only antenna is in working condition, and the remaining
antennas are dormant, so as to achieve the purpose of saving power.
Click the Save button to save the settings.

5.4.5 MAC Filtering

Choose menu "Advanced → Wireless 2.4GHz → MAC Filtering", you can control the wireless
access by configuring the MAC Filtering function, shown in Figure 5-21.
2.4GHz Access Control:
Wireless Interface - Select an available wireless interface from the drop-down list.

Enable MAC Filtering- The switch for the MAC Filtering. If you turn on this button, the field

will become green and you can filter wireless users by MAC Address.
Filtering Rules:
Select the Filtering Rule - You can select either of Block List or Allow List as the MAC

filtering rule.
Click the Save button to save the settings.
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
Figure 5-21 Wireless 2.4GHz – MAC Filering
46