TP-Link Archer CR700 User Manual page 54

Archer CR700
Settings:
See each other - If Allow guests to see each other is selected, anyone who connects to the

guest network can access each other.
Access my local network - If Allow guests to access my local network is selected,

anyone who connects to the guest network has access to your local network, not just Internet
access.
Wireless:
Wireless radio – Check the box to enable this function. The guest network function is

disabled by default.
Name (SSID) - Create a name for the guest network. When setting up a Guest network, it is

strongly recommended to use a name that easily distinguishes it from your primary network.
The default name is TP-LINK_Guest_2.4GHz. If you want to hide the guest network from the
Wi-Fi network, check the Hide SSID.
Security - It's strongly recommended to select WPA/WPA2 Personal. If you do not want to

use wireless security, choose No Security.
Version -You can choose the version of the WPA-PSK/WPA2-PSK security by selecting

Auto, WPA-PSK or WPA2-PSK. The default setting is WPA2-PSK.
Encryption - You can choose the encryption by selecting Auto, TKIP or AES.

Wireless Password - Create a password for the guest network. The password must have a

minimum of 8 characters in length.
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
Figure 5-19
44