TP-Link Archer CR700 User Manual page 92

Archer CR700
Account Management:
Here you can set the account user information about Old Password, New Password and
Confirm Password.
It is strongly recommended that you should change the factory default user name and password of
the router, because all users who try to access the router's Web-based utility or Quick Setup will
be prompted for the router's default user name and password.

Note:
Enter the new Password twice to confirm it. The level of the new password's security will be shown
on the screen as Low, Middle or High.
Click the Save button save the settings.
Remote Management:
Remote Management – Check the Enable to enable the remote management.


Note:
To access the router, you should type your router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port
number. For example, if your router's WAN address is 202.96.12.8, and the port number used
is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked for
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
Figure 5-63
82