TP-Link Archer CR700 User Manual page 74

Archer CR700
External Port - The numbers of External Service Ports. You can enter a service port or a

range of service ports (the format is XXX – YYY; XXX is the Start port and YYY is the End
port).
Internal IP - The IP address of the PC running the service application.

Internal Port - The Internal Service Port number of the PC running the service application.

You can leave it blank if the Internal Port is the same as the Service Port, or enter a
specific port number when External Port is a single one.
Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols

supported by the router).
Enable – Click the

will become .
Modify – Click the

you can click the
To setup a virtual server entry:
1. Click the Add button.
2. Enter the Service Name.
3. Enter the external port of the computer running the service application in the External Port
field.
Enter the IP address of the computer running the service application in the Internal IP field.
4.
5. Enter the internal port of the computer running the service application in the Internal Port
field.
6. Select the protocol used for this application in the Protocol drop-down list, either TCP, UDP,
or All.
Enable the Enabled this entry checkbox.
7.
8. Click the OK button.
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
icon to enable the function. If this function has taken effect, the icon
icon to edit the corresponding entry. If you want to delete this entry,
icon.
64