TP-Link Archer CR700 User Manual page 27

Archer CR700
2.4GHz - If Enable Wireless Radio is selected, please complete the following parameters.

Name (SSID) - Create a name for the guest network. When setting up a Guest network, it

is strongly recommended to use a name that easily distinguishes it from your primary
network. The default name is TP-LINK_Guest_2.4GHz. If you want to hide the guest
network from the Wi-Fi network, check the Hide SSID.
Password - Create a password for the guest network. The password must have a

minimum of 8 characters in length.
Allow guests to see each other - If Allow guests to see each other is selected,

anyone who connects to the guest network can access each other.
Allow guests to access my local network - If Allow guests to access my local

network is selected, anyone who connects to the guest network has access to your local
network, not just Internet access.
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide
Figure 4-8
Figure 4-9
17